IS1040 - 100 Mbps FEx4 Packet Capture Card
|
|
 100Base-T 100 Mbps FEx4 Network Interface
PCI 64 bit 66 MHz
Hardware-based Packet Processing
Hardware-based 5-Tuple Packet Filter, GPS Timestamp 
|
|
Lossless Packet Capture with Least CPU Load
|
|
|
Need a lossless capture card even in full 100 Mbps environments? Suffered from high CPU utilization during heavy-traffic packet capture? IS1040 packet capture card is exactly what you needed. This card delivers all of the incoming packets to your applications without any intervension of CPU. It also provides, stable capture performance in any size of packet.
Give chances to all of your packets. Don't let them be discarded.
|
|
Technical Aids & Customize Service
IS1040 card is reception-only which is primarily designed for packet capture and analysis under 100 Mbps POS. This card can optionally provide additional features like packet filtering, packet sampling, pattern matching, and so on. Refer to the service options below.
|
|
|
|
100 Mbps POS Monitoring Interface
Support for extensible OC-192c single mode fiber
Support for both PPP and HDLC layer-2 protocols
PCI-X 64 bit Bus Interface
Support for 100/133MHz PCI-X bus clock speed
Higher packet DMA performance with lower CPU consumption
Hardware-based Packet Capturing Engine
FPGA-accelerated packet reception to host memory which insures 100% line-speed packet
processing,with least CPU consumption
Hardware-based packet capturing engine providing
system stability and minimum delivery latency
Hardware-based timestamp feature cooperating with GPS receiver for higher time accuracy
(Timestamp resolution: 100 nano sec)
Support for Linux O/S
Support for Linux Kernel version 2.4.x, 2.6.x
Support for 64 bit Linux O/S
Support for PCAP Library
Provide ISN library interface
Support for PCAP library interface (libpcap)
|
|
|
|
Monitoring Interface Specifications
Interface 10/100 BASE-T * 4 EA
Media Type RJ45 connector
Monitoring Network Specifications
Point-to-Point Protocol over SONET/SDH according to RFC 2615(1619)/1663
Supports packet based link layer protocols using byte synchronous HDLC framing
Perform self-synchronous POS data descrambling on the received STS-48c payloads
FCS validation for CRC-32 polynomials
Permits FCS stripping on the POS-PHY output data stream
PCI Bus Specifications
PCI-X Clock 100/133 MHz
PCI Data/Address 64 bit and 32 bit
PCI Modes Master/slave
Hardware Packet Processor Specifications
Full 2.5 Gbps line speed packet processing engine
Timestamp with 100 nano second resolution(optional)
Packet snapping size: 60 ~ 1536
Packet reception statistics
Time Interface Specifications
Interface GPS interface * 1 EA
Connector RJ45 connector
Physical Characteristics
Height 112.00 mm
Length 212.67 mm
Power Requirements
Operating Voltage +5V, +3.3V
Power Consumption Less than 7.5 Watts
Environmental Specifications
Operating Temperature 0 to 55
Relative Humidity 5% to 85%
Software Specifications
Support for Linux kernel version-2.4.x, 2.6.x
Provide ISN library inferface (Sysmate proprietary)
Support libpcap library interface
|
|
|
|
IS1040 10/100 Mbps FEx4 PCAP Card 1 EA
Quick Start Guide 1 EA
Installation CD with Drivers, Sample Software and User's Guide 1 EA
|
|
|
|
IS1040 can be customized according to your requirements.
You can consult with our development team about your requirements.
Examples of optional features are:
- 5-tuple based Packet Filter
- Packet Sampling Engine: hash, random, ...
- Pattern Matching Engine
- Snapping Packet Size Functionality
- IPv4 5-tuple-based packet filter
|
|
|
|
|
Technical Service
Technical aids needed to develop systems using InterStream Cards
Contact via http://www.sysmate.com or send E-mail to sales@sysmate.com
Maintenance Service
One year of on-site assistance, technical support and software upgrades
|
|
|
|
|
|
|
